Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CPT-S transducers.. more info please
04-12-19, 11:30 PM (This post was last modified: 04-17-19 02:40 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] CPT-S transducers.. more info please
Hi, What is the scoop on the new E70340/1 transducers? They appear to be similar to the B175.

What is the advantage over a B60 vs a CPT high freq 2" unit vs the B60 etc.


No down vision with these E70341/0 ducers I take it?

My client is looking for downvision thruhull bronze for the axiom, but does not want expense of side vision (he would need a pair if this were the case as keel is in the way and no spot for center mount single unit)



shallow freshwater <200 ft.
38' Clorox bottle f/b


thanks Chuck
Find all posts by this user
Quote this message in a reply
04-17-19, 03:00 PM
Post: #2
RE: [CA11] CPT-S transducers.. more info please
Welcome to the Raymarine Forum NWMI,

The technology within the CPT-S transducers is essentially the same 200W high frequency CHIRP sonar technology found within the conical CHIRP components of the RealVision and DownVision transducers. However, unlike the latter transducers, the CPT-S transducer are limited to supporting low power high frequency conical CHIRP sonar imaging (i.e. no support for DownVision, RealVision, or SideVision). The imaging produced by the CPT-S transducers would be similar to that of the B60, but produce better detail. CPT-S should support the operational depths which you have specified. These low profile transducers make them the choice for those seeking low power bottom tracking / fishfinding capability who are not seeking to install a DownVision or RealVision transducer. These transducers are particularly popular with sailboaters seeking a graphical representation of the bottom.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)