The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Fishfinders v / [CA] [CA11] CP570 in a network with 2 axiom PRO

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] CP570 in a network with 2 axiom PRO
04-15-19, 10:41 AM (This post was last modified: 04-18-19 01:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
charlestai Offline
Junior Member
**
 		Posts: 6
Joined: Feb 2019
Reputation: 0
[CA11] CP570 in a network with 2 axiom PRO
In my network with 2 Axiom Pro, only the master Axiom can display the CP570 data. The network is working. The lights are flashing on the network switch and the charts loaded on the master is visible from the secondary Axiom. However, the secondary Axiom has no sounder data. Is this correct? I would assume both Axioms on the network can display CP570 data. Thank you your advice.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] CP570 in a network with 2 axiom PRO - charlestai - 04-15-19 10:41 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication