Raymarine forum / Raymarine Forums / Autopilots v / [DG] [DG11] ACU-200 rudder transducer clutch connection

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ACU-200 rudder transducer clutch connection
04-21-19, 10:42 PM (This post was last modified: 04-23-19 02:15 PM by Chuck - Raymarine - Moderator.)
Post: #1
bruce@westcut.com Offline
Junior Member
**
 		Posts: 6
Joined: Jul 2018
Reputation: 0
[DG11] ACU-200 rudder transducer clutch connection
I am replacing an existing Raymarine autopilot with an EV1 (ACU-200) autopilot computer. My problem is that the rudder transducer and clutch connections do not have screw down wire connections. Instead the ACU-200 has pins sticking up and it looks like the is a companion plug with screw down terminals that either was not included with the package or is an accessory I need to purchase.

Client will be leaving on 4/28 for an extended trip. I need to know what is needed and where I can purchase the plug ASAP PLEASE
Find all posts by this user
Quote this message in a reply
04-23-19, 11:12 AM (This post was last modified: 04-23-19 02:15 PM by Chuck - Raymarine - Moderator.)
Post: #2
Derek - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 1,416
Joined: Nov 2017
Reputation: 9
RE: [DG11] ACU-200 rudder transducer clutch connection
Hi Bruce

The plugs are part number R12188 and can be purchased through a Raymarine dealer
Thanks
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication