Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] M232 vs T series
04-23-19, 05:58 PM (This post was last modified: 04-25-19 02:39 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] M232 vs T series
I am looking at getting a thermal camera. I wondered if someone could explain the difference/advantages between the new Flir M232 and the refurbished ray marine cameras that are available, the T350 9 Hz, T453 25Hz and T456 30Hz?
Find all posts by this user
Quote this message in a reply
04-25-19, 02:40 PM
Post: #2
RE: [CA11] M232 vs T series
Welcome to the Raymarine Forum plockie,

What, if any, make/model of MFD are you seeking to interface the marine thermal camera to?
Find all posts by this user
Quote this message in a reply
07-13-19, 09:51 PM (This post was last modified: 07-15-19 10:13 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] M232 vs T series
Chuck
I have the same question on the M232 and the refurbished T cameras on the raymarine site. The MFD to interface with would be the Axiom Pro RVX

Thanks
Chet

Free Fallin’
2008 Beneteau 49
Find all posts by this user
Quote this message in a reply
07-15-19, 03:16 PM
Post: #4
RE: [CA11] M232 vs T series
Welcome to the Raymarine Forum Chet,

There are a number models of T-Series Thermal Cameras. Their specifications / features may be found here. The specifications for the FLIR M232 Thermal Camera may be found here. The M232 thermal camera is an excellent option for those seeking an entry level pan and tilt thermal camera for their system. One feature which distinguishes the M232 from other FLIR thermal cameras is that when used with an Axiom/Axiom Pro/Axiom XL MFD, the MFD will support FLIR's ClearCruiseâ„¢ intelligent thermal analytics.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)