[CA11] Integrating a 250 AIS

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[CA] [CA11] Integrating a 250 AIS

11-30-19, 12:34 PM

Post: #7

morepower Offline

Member

Posts: 54
Joined: Jul 2018
Reputation: 0

RE: [CA11] Integrating a 250 AIS

Ok... So started with testing the A50D using the wraparound test... Both Nmea 0183 channels seemed to functioning correctly.... Seeing both RX & TX messages... Checked the wiring at the termination ends by doing the same test... all ok...
The 250 AIS unit seems to be faulty... I presume this unit is not longer repairable? or not cost effective to repair...

I will post on another thread the questions I've got with the SHS...

Regards

Tim

« Next Oldest | Next Newest »

Messages In This Thread

[CA11] Integrating a 250 AIS - morepower - 04-26-19, 02:37 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 04-29-19, 12:17 PM

RE: [CA11] Integrating a 250 AIS - morepower - 11-24-19, 03:36 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-25-19, 10:30 AM

RE: [CA11] Integrating a 250 AIS - morepower - 11-26-19, 02:34 AM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-26-19, 09:11 AM

RE: [CA11] Integrating a 250 AIS - morepower - 11-30-19 12:34 PM

RE: [CA11] Integrating a 250 AIS - Chuck - Raymarine - Moderator - 11-30-19, 02:46 PM

User(s) browsing this thread: 1 Guest(s)