Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] E120W & IP200 camera
04-27-19, 05:18 AM (This post was last modified: 04-29-19 12:32 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] E120W & IP200 camera
Hi.
Thanks for your helpfull job.
I need to know if it's possible to connet a IP200 camera in a STHS network to show video in 2x E120W or it's only possible a analog connection via BNC-power connector.
Thanks a lot for your help!
Find all posts by this user
Quote this message in a reply
04-29-19, 12:39 PM
Post: #2
RE: [CA11] E120W & IP200 camera
Welcome to the Raymarine Forum nauelec,

Unfortunately, the software of the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s is not designed to process video from an IP camera. The first Raymarine MFDs feature support for IP cameras were the a/c/e/eS/gS-Series MFDs which had been updated to run the latest LightHouse II software. Raymarine offers the CAM100 and CAM50 NTSC & PAL cameras for use with the C/E-Series Widescreen MFDs, E-Series Classic MFDs, and G-Series GPM400s.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)