Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Blue Screen Dragonfly
04-27-19, 09:30 PM (This post was last modified: 04-30-19 09:28 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Blue Screen Dragonfly
My Dragonfly has stopped and looks like a computer blue screen. Nothing shows, but the depth speed and temp displays. Can not get any other activity from the sonar or downvision prompts. Didn't try the chart or GPS. What now???
Find all posts by this user
Quote this message in a reply
04-30-19, 09:32 AM
Post: #2
RE: [CA11] Blue Screen Dragonfly
Welcome to the Raymarine Forum bonzoid,

Should the problem be observed with the vessel located within the water, then it would unfortunately appear that your Dragonfly display has suffered a failure of either the display's internal circuitry and/or within the transducer itself. It would be recommended that the Dragonfly display along with its transducer (disregard) if a thru-hull transducer has been installed) be sent to Raymarine’s Product Repair Center to be bench checked / serviced.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-03-19, 03:58 AM (This post was last modified: 05-06-19 10:23 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Blue Screen Dragonfly
Thank you. i was hoping that wasn't the case. The unit was working fine then it faded to blue. I'll have to get it off the boat and send it in.I suspect there is a process to do so.
Find all posts by this user
Quote this message in a reply
05-06-19, 10:26 AM
Post: #4
RE: [CA11] Blue Screen Dragonfly
Bonzoid,

Q. I suspect there is a process to do so.
A. Indeed there is. Simply click on the Book a Repair link found on the Raymarine Factory Repair Center's web page (use the link provided within my initial response) to initiate the process.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us