Post Reply 
 
Thread Rating:
  • 1 Vote(s) - 4 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Color Pallet Not Available with E120
05-04-19, 08:12 PM (This post was last modified: 05-06-19 04:28 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Color Pallet Not Available with E120
Just added a digital radar to a classic E120 system with ethernet switch. The color pallet is not selectable in the radar setup on the E120. Color is not available either, it still looks like the old analog radar on the screen. What are the possible problems that prevent the color from being available?
Find all posts by this user
Quote this message in a reply
05-06-19, 04:35 PM
Post: #2
RE: [CA11] Color Pallet Not Available with E120
Welcome to the Raymarine Forum olesenrl,

The features supported by a MFD which has been interfaced to a Digital radome are essentially the same as those which would have been available had a radome or open array radar having an analog video interface been interfaced to the system. The color radar features which you have inquired about are only be supported by a MFD which has been interfaced to a HD radome, HD open array radar, SuperHD open array radar, or Quantum/Quantum II radome (not supported for use with E-Series Classic MFDs).
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)