Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Element Transducer Extender
05-05-19, 05:01 PM (This post was last modified: 05-07-19 02:03 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Element Transducer Extender
I currently have a Dragonfly with a CPT transducer. I plan on purchasing an Element. Is the Dragonfly transducer EXTENDER compatible with the new transducer that comes with the Element?
Find all posts by this user
Quote this message in a reply
05-07-19, 02:33 PM
Post: #2
RE: [CA11] Element Transducer Extender
Welcome to the Raymarine Forum jfp202,

Q. Is the Dragonfly transducer EXTENDER compatible with the new transducer that comes with the Element?
A. Negative. The design of HyperVision™ transducers is significantly different from that of the Dragonfly transducers. Accordingly, the extension cables for HyperVision™ transducers differ from those of Dragonfly transducers. The part number for the 4m HV–100 transducer extension cable is A80562. Only one transducer extension cable should be used with the HV-100 transducer.
Find all posts by this user
Quote this message in a reply
05-08-19, 08:47 PM
Post: #3
RE: [CA11] Element Transducer Extender
Thanks, Chuck
Find all posts by this user
Quote this message in a reply
05-09-19, 08:24 AM
Post: #4
RE: [CA11] Element Transducer Extender
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)