Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Airmar B744V and St50
05-06-19, 05:34 AM (This post was last modified: 05-08-19 08:03 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Airmar B744V and St50
Dear All,
I recently bought a IOR two tonner with, let's say, "mixed" (and incomplete) instruments.
Wind instrumensts are St50+ series, which I appreciate and fit - more or less - the lady's age.

There's no log.

On the other hand, there's a bulky GPS/echo which uses an Airmar B744V triducer.

Is there a way to feed the B744V infos to an St50 Speed?

Thank You, and All the Best

Alessandro
Find all posts by this user
Quote this message in a reply
05-08-19, 08:07 AM
Post: #2
RE: [DG11] Airmar B744V and St50
Hi Alessandro

Thank you for your enquiry,

We would need to know the spec of the transducer to identify if it can be used. The B744V has a variety of configurations, some will be suited for depth transducer use only and others for fishfinder type sonar - they are not interchangeable either.

Check on the cable there should be one or more labels and send us a copy of all the data off the labels, we can then advise.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us