Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] connecting auto pilot ST 6001
05-07-19, 07:08 AM (This post was last modified: 05-09-19 04:31 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] connecting auto pilot ST 6001
I am in process of upgrading my MFD and transducers etc. The current configuration is a RL 80C, dsm and had the Raymarine ST 6001 which plugs directly into the back of the RL 80. I would like to continue using it. The new MFD is a ES127, can this be done and if so how do I connect them.
Find all posts by this user
Quote this message in a reply
05-09-19, 04:41 AM
Post: #2
RE: [DG11] connecting auto pilot ST 6001
H iRKW68

Thank you for your enquiry.

The best way to connect the systems are to keep the existing SeaTalk network intact, then use a SeaTalk to STng converter, E22158 as an interface between the SeaTalk network and the STng network that the eS127 uses.

please refer to this FAQ for firthe rinformation on the interconnection.

Regards

Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us