Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] C80 to Axiom 9" adaptor
05-09-19, 03:32 PM (This post was last modified: 05-09-19 04:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] C80 to Axiom 9" adaptor
Hi all,

Does an adaptor template exist to mount an Axiom 9" where a C80 used to be?

I cannot find it on the website.

Many thanks,
Rom
Find all posts by this user
Quote this message in a reply
05-09-19, 04:25 PM
Post: #2
RE: [CA11] C80 to Axiom 9" adaptor
Welcome to the Raymarine Forum Rom,

It would typically be recommended that an Axiom 9 or Axiom 9RV MFD be considered as a replacement for a C80 MFD or E80 MFD. The installation template these MFDs (also includes dimensional data for the MFD's cutout and footprint) may be found here. Raymarine also now offers the A80564 C80/E80 to Axiom 9 Adapter Plate. Please additionally click here to view a FAQ addressing replacement of a C-Series Classic MFD with an Axiom MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-10-19, 02:34 PM (This post was last modified: 05-10-19 03:51 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] C80 to Axiom 9" adaptor
Hi Chuck,

Thanks for the answer, very informative.

Thanks,
Rom
Find all posts by this user
Quote this message in a reply
05-10-19, 03:51 PM
Post: #4
RE: [CA11] C80 to Axiom 9" adaptor
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us