Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Never see the fish ARC
05-14-19, 06:37 AM (This post was last modified: 05-14-19 02:05 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Never see the fish ARC
Hi,
I have an E90W with a DSM300 and a b744V transducer. Everything seems to work fine yet the targets I see are always only a dot or a blotch of yellow or red on the screen. I never actually see the arc of a fish. Is there a setting that I can make which would display the arc of a fish or does this setup only show a target that is just a dot.
Thanks
Find all posts by this user
Quote this message in a reply
05-14-19, 02:07 PM (This post was last modified: 05-14-19 02:09 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Never see the fish ARC
Welcome back to the Raymarine Forum unixdood,

Based upon the description of the plot, the system appears to be functioning normally. Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
05-15-19, 05:52 AM
Post: #3
RE: [CA11] Never see the fish ARC
Oh I see now. I thought all fish should be the ARC and the dots were bait. Thanks for the quick response!
Find all posts by this user
Quote this message in a reply
05-15-19, 07:35 AM
Post: #4
RE: [CA11] Never see the fish ARC
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us