Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro - waypoints remain in chart
05-18-19, 05:08 AM (This post was last modified: 05-21-19 11:51 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro - waypoints remain in chart
When unloading (select not to show the route) a route - the waypoint remain in the chart - only the lines between the waypoint desepares.

When we are racing several different cources within i day this makes the chart "busy" with dots

Thank you for input how to solve this
Find all posts by this user
Quote this message in a reply
05-21-19, 11:52 AM (This post was last modified: 05-21-19 11:53 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Axiom Pro - waypoints remain in chart
Welcome to the Raymarine Forum Terge,

As you have suggested, commanding a route to be hidden will cause the route's leg lines to be hidden, but its waypoints will remain on the screen. You will find that the command sequence MENU->WAYPOINTS, ROUTES, AND TRACKS->SHOW/HIDE (WAYPOINTS)->HIDE ALL will hide all of the waypoints via a single command. After doing so, then the desired route may be selected to be navigated/shown within the Chart application.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us