Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Flir m132 -clear cruise feature
05-30-19, 11:39 AM
Post: #7
RE: [TG11] Flir m132 -clear cruise feature
[quote='Tom - Raymarine - Moderator' pid='30056' dateline='1559111288']
Hmm. You should have 'Camera Motion' in between 'ClearCruise' and 'Page Settings'. This menu is where you turn on/off the Surveillance Scan, for example, and has been incorporated in the software from very early on in LH3.

The menus are dynamically-generated depending on what hardware is detected and what other configuration options are chosen, and we have come across cases where they might not be correctly displayed after a software update. I would suggest backing up all of your data and settings (Home > My Data > Import/Export > Save My Data / Save Settings) and then doing a factory reset (Settings > This Display > Factory Reset) and see whether the menu appears correctly then.

Would you mind coming back to me to let me know whether this solves the problem, either way?

Regards,
Tom

[/quot

I did the reset as instructed and have the same result...no option For camera motion... as you can see in the attached photo- distance still reading 0
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [TG11] Flir m132 -clear cruise feature - rltrbill - 05-30-19 11:39 AM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)