[TG11] Flir m132 -clear cruise feature

Thread Rating:

0 Vote(s) - 0 Average
1
2
3
4
5

Threaded Mode | Linear Mode

[TG] [TG11] Flir m132 -clear cruise feature

06-03-19, 03:06 AM (This post was last modified: 06-03-19 07:31 AM by Chuck - Raymarine - Moderator.)

Post: #8

Tom - Raymarine - Moderator Offline

Administrator

Posts: 1,067
Joined: Nov 2017
Reputation: 7

RE: [TG11] Flir m132 -clear cruise feature

Ah. That will be the problem. I was assuming that you had Axiom displays. I'm sorry to say that ClearCruise AR is Axiom-only, it won't run on LH3 on eS or gS hardware (see http://www.raymarine.com.au/clearcruise/).

I am not involved in the development, but I assume this is a processing limitation: I know it's been a struggle to get LH3 running with a useful feature-set on the older hardware, and AR is quite processing-intensive.

Sorry about that,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.