Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Quick access to radar transmit on and off
06-03-19, 09:05 AM (This post was last modified: 06-04-19 02:14 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Quick access to radar transmit on and off
Axiom's short cut (... accessed by swiping left to right across
the Power button swipe area on an Axiomâ„¢) allows stopping radar transmit. I generally use the radar as an overlay on the chart application and can stop transmit quickly via the short cut, but cannot turn it back on without first going to the radar application. Why not make the short cut a toggle transmit on-off rather than simply off? Or is there another direct way to turn on radar transmit from a chart application?
Find all posts by this user
Quote this message in a reply
06-04-19, 02:19 PM (This post was last modified: 06-04-19 02:46 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Quick access to radar transmit on and off
Welcome to the Raymarine Forum Edward,

Thanks for the product feedback. The command sequence MENU->TARGETS->RADAR SETTINGS->TRANSMIT from within the Chart application may be used to cause the radar to transmit. Within the user interface of past products, the shortcuts menu (accessed via the Power button) provided access to commanding the radar to transmit and to revert to standby. A feature request will be logged to consider this feature for inclusion within a future LightHouse 3 software update to permit faster access to controlling the state of the radar.

Please click here more information concerning product and feature suggestions.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)