Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Analogue cam to Axiom MFD
06-03-19, 09:09 AM (This post was last modified: 06-04-19 11:10 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] Analogue cam to Axiom MFD
Hi,

I have just installed 2 Axiom MFD´s on a vessel.
There is an old analogue camera system on board we want to integrate.

As per Chucks thread here http://forum.raymarine.com/showthread.php?tid=31
the Axis M7011 video encoder should do the trick. I have everything connected and the cameras work fine on my laptop, but the Axiom´s don´t detect them in the network.

Does anybody have a detailed description of the Axis M7011 configuration? I´m sure the problem can be found there.

Kind regards,

Karsten
Find all posts by this user
Quote this message in a reply
06-04-19, 01:42 PM
Post: #2
RE: [DG11] Analogue cam to Axiom MFD
Karsten,

The Axis M7011 video encoder should function right out of the box with systems running the latest LightHouse II or LightHouse 3 software. Like IP cameras used with these systems, ONVIF User Authentication MUST BE DISABLED. The default ONVIF User Authentication configuration of these encoders is disabled. These encoders should not be connected to a computer or ONVIF User Authentication will be enabled. It is recommended that Axis be contacted regarding how to reset the encoder to it's out of box configuration.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us