Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Raypilot with Garmin MFD
06-03-19, 12:54 PM (This post was last modified: 06-05-19 11:48 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Raypilot with Garmin MFD
Updated the old Raymarine radar and char plotter to Garmin 7612xsv. What do I need to do to use the seatalk 100 and 650 head with the new mfd? Thanks in advance.
Find all posts by this user
Quote this message in a reply
06-04-19, 08:29 PM (This post was last modified: 06-05-19 11:49 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Raypilot with Garmin MFD
Hello rlfletc,

You'll need a Seatalk1 - SeatalkNG (AKA NMEA2000) convertor (http://www.raymarine.com.au/view/?id=3011. That will bridge heading from the pilot's Seatalk1 network to NMEA2000 and navigation data from the Garmin back the other way. You'll also need an STNG-Devicenet adaptor cable.

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us