Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Axiom not connecting via Bluetooth to iPhone
06-04-19, 09:42 AM (This post was last modified: 06-05-19 10:41 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom not connecting via Bluetooth to iPhone
Can Axiom 9" MFD (LightHouse 3.9) bluetooth pair with my iPhone (IOS 12.3 operating system)?
I tried to pair the 2 devices using bluetooth.

Both devices were able to find each other with codes so I hit the pair buttons on both devices but they still could not connect???

I get a notice "Raymarine E70367 is not supported" on my phone.

I am wanting to Sync my Navionics tracks, routes, & waypoints.
Find all posts by this user
Quote this message in a reply
06-05-19, 10:56 AM
Post: #2
RE: [CA11] Axiom not connecting via Bluetooth to iPhone
Welcome back to the ktcarter,

The Navionics Boating app and the MFD running LightHouse 3 or LightHouse II software are designed to communicate with one another via Wi-Fi, not Bluetooth communications technology. That said, and as indicated within a thread in which I recently addressed this subject, Navionics has acknowledged a fault within the Navionics software libraries included within the LightHouse 3 v3.9.46 software update which will prevent the waypoint/route synchronization feature from working. Should one be unable to get the Boating app's synchronization feature to work, then it would be necessary either wait for the LightHouse 3 v3.10.x software update to be released or to downgrade the MFD's software to 3.8.105.
Find all posts by this user
Quote this message in a reply
06-18-19, 02:51 PM
Post: #3
RE: [CA11] Axiom not connecting via Bluetooth to iPhone
Thanks Chuck,
I used the wi-fi option as you suggested and all worked well.
Find all posts by this user
Quote this message in a reply
06-18-19, 04:01 PM
Post: #4
RE: [CA11] Axiom not connecting via Bluetooth to iPhone
You're welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)