Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Additional use for EV1 AHRS
06-04-19, 08:36 PM (This post was last modified: 06-05-19 09:57 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Additional use for EV1 AHRS
Given the capability of the EV1, it should be able to generate the current heel angle value and graphic of a heel gauge on an Axiom Sailing Dashboard App. It could probably be done with the 3-axis accelerometers, if the boat was assumed to be level at EV1 power up. The magnetometers could help find level/gravity vector.
Find all posts by this user
Quote this message in a reply
06-05-19, 10:03 AM
Post: #2
RE: [DG11] Additional use for EV1 AHRS
Hi Dan,

Thankyou for your enquiry.

The Heel angle is currently displayed as ROLL on our current i70 and AXIOM MFDs, these are configurable as custom screens.

Does this help?
Thanks
Derek
Find all posts by this user
Quote this message in a reply
06-05-19, 07:40 PM
Post: #3
RE: [DG11] Additional use for EV1 AHRS
Ahhh...awesome. I over look d that data item. So it looks like it cannot be displayed as a data overlay on the chart app, only on the pages in the Dashboard App. Correct?
Thank You
Dan
Find all posts by this user
Quote this message in a reply
06-06-19, 04:23 AM
Post: #4
RE: [DG11] Additional use for EV1 AHRS
Dear Dan_Y,

Thank you for your response.

This is correct, this data is only available on the dashboard page and not as a data box overlay on the chart app.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us