Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?
06-12-19, 08:16 AM (This post was last modified: 06-13-19 03:17 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?
Hello from Norway :-)

I have a MFD eS 128 in my boat. There are 2x Volvo Penta KAD300 engines in the boat and I have successfully installed one YDES04 J1708 gateway pr engine, attached them to the backbone and displays the live engine data on my eS 128. See attached picture.

Is there a way to make the eS 128 calculate consumption and present it as liter/nm?


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
06-20-19, 05:52 AM
Post: #2
RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?
Dear mmosberg,

Thank you for your query.

The eS128 can show fuel used by the following means using the PGN127497;

-distance per volume
-volume per distance
-litres per 100km

For full information and instruction on setting this up, please refer to Chapter 11.1 on P122 of the Lighthouse 2 maunual, this is available to download here.

Many Thanks
Louse
Find all posts by this user
Quote this message in a reply
06-20-19, 02:49 PM (This post was last modified: 06-20-19 02:59 PM by Chuck - Raymarine - Moderator.)
Post: #3
Wink RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?
Thanks a ton

MY 2003 Windy 32 Scirocco HT, 2xKAD300
Callsign LD3800
MMSI 257076050
Find all posts by this user
Quote this message in a reply
06-21-19, 02:52 AM
Post: #4
RE: [LW11] eS 128 - NMEA2000 fuel consumption. How to display liter/nm?
You are welcome.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us