Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] ST4000+ UPDATE
06-12-19, 07:04 PM (This post was last modified: 06-13-19 05:03 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] ST4000+ UPDATE
Greetings All.

I have a st4000+ autopilot as part of the instrument package and it is displaying a seatalk error and none of the other instruments work. When i disconnected it from the seatalk all the instruments work. I updated the chartplotter to a B & B Vulcan 7.

Am I able to update the autopilot controller to newer model/edition without having to replace the whole package?

Thank you for your assistance.
Find all posts by this user
Quote this message in a reply
06-13-19, 05:06 AM
Post: #2
RE: [DG11] ST4000+ UPDATE
Hi arkiebar

Thank you for your enquiry

The ST4000 control unit can be replaced with the EV100 system, the drive unit can be retained, but you will need the p70s Control head, EV1 sensor and the ACU100 actuator Control unit.

The Raymarine Website found here will give more specifics.

Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)