[DG] [DG11] ST4000+ UPDATE

[arkiebar]

Greetings All.

I have a st4000+ autopilot as part of the instrument package and it is displaying a seatalk error and none of the other instruments work. When i disconnected it from the seatalk all the instruments work. I updated the chartplotter to a B & B Vulcan 7.

Am I able to update the autopilot controller to newer model/edition without having to replace the whole package?

Thank you for your assistance.

[Derek - Raymarine - Moderator]

Hi arkiebar

Thank you for your enquiry

The ST4000 control unit can be replaced with the EV100 system, the drive unit can be retained, but you will need the p70s Control head, EV1 sensor and the ACU100 actuator Control unit.

The Raymarine Website found here will give more specifics.

Regards
Derek