Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] DragonFly comes on when power is present
06-20-19, 03:14 PM (This post was last modified: 07-15-19 04:04 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] DragonFly comes on when power is present
John,

Like most Raymarine products featuring a power button, the Dragonfly displays support a last power state memory feature, the equipment may be switched ON/OFF from a single location (i.e. the breaker/switch panel), eliminating the need to switch ON/OFF equipment via each product's POWER button. This can be especially convenient in larger systems.

The last power state memory feature of Dragonfly displays functions as follows:
- should the product be in the ON state and should the circuit supplying the product be de-energized, then the product will return to the ON state when the circuit is re-energized.
- should the product in the OFF state and should the circuit supplying the product be de-energized, then the product will remain in the OFF state when the circuit is re-energized. Pressing the POWER button of the product will return it to the ON state.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
RE: [CA11] DragonFly comes on when power is present - Chuck - Raymarine - Moderator - 06-20-19 03:14 PM

Forum Jump:


User(s) browsing this thread: 1 Guest(s)