Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] P70S Wind Mode
06-25-19, 12:01 PM (This post was last modified: 06-26-19 09:59 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] P70S Wind Mode
I am unable to engage Wind Mode on a P70S by simultaneously pressing Auto and Standby. Doing so brings up the Display Brightness setting.

I can engage wind mode via the Menu OR by making Wind the left soft-key. Works fine. I prefer the left soft-key to remain TRACK after years of experience with the ST6000.

Any suggestions?
Find all posts by this user
Quote this message in a reply
06-26-19, 10:02 AM
Post: #2
RE: [DG11] P70S Wind Mode
Hi Alan,
Thank you for your enquiry.

The STANDBY + AUTO press for windvane was not enabled in the p70 range of control units, as you point out, the only means to engage windvane mode is the shortcut key on the bottom left of the screen or the menu option.

Regards

Derek
Find all posts by this user
Quote this message in a reply
07-02-19, 11:45 AM (This post was last modified: 07-02-19 01:31 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [DG11] P70S Wind Mode
Thanks, Derek. The documentation for the unit needs to be updated.

Best regards
Find all posts by this user
Quote this message in a reply
07-04-19, 07:52 AM
Post: #4
RE: [DG11] P70S Wind Mode
H iAlan,

Thanks for the feedback, we will check and amend as appropriate, thankyou for flagging this up

Kind regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us