Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Unable MFD e7 to send GPS position to VHF
06-28-19, 04:47 AM (This post was last modified: 07-03-19 05:08 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Unable MFD e7 to send GPS position to VHF
Hi,

My e7 (n°62354 0130 508) is connected to the input of the VHF RT550 via NMEA 0183.

When I turn on the devices, the VHF doesnt receive the GPS position.
Diagnostic screen shows that GPS position sentences are well sent in the buffer of NMEA 0183 port 1.

Then, I change the NMEA setting :
Home/ Setup/ NMEA/ NMEA input port 1 >> "4800"

I come back to home sceen

and, I change again NMEA setting :
Home/ Setup/ NMEA/ NMEA input port 1 >> "AIS 38400"
And I come back to home screen... and then, VHF receives GPS position !!!


I updated the e7 software (R19-v19.03a_v19.00p_v1.20G_v1.20n_v1.20r_v1.20j_v17.03m-ISO), but no improvement.

Many thx for your help.

regards
Jean-Pierre
Find all posts by this user
Quote this message in a reply
07-03-19, 05:20 AM
Post: #2
RE: [LW11] Unable MFD e7 to send GPS position to VHF
Dear Arsouin,

Is your RT550 VHF the AIS version?

What colour NMEA cables are you connected to from the e7 to the RT550 AIS?

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)