Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG] [TG11] Trunnion alternatives for c/e 12x series
07-01-19, 10:30 AM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Trunnion alternatives for c/e 12x series
Looking to replace my two current trunnion mounted classic E120s with 12" c/e series but the 12" trunnion mounts for c/e (R70356) has been discontinued. Called Raymarine and was told no stock, and I can't find any on line. Two of the refurb c125s would do nicely if I can find a trunnion mount option as I have a CP370, radar etc that should work nicely with the c215. Any Alternatives? Suspect the current E120 classic mounts won't be a fit. Thanks for your suggestions.
Find all posts by this user
Quote this message in a reply
07-10-19, 05:06 AM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [TG11] Trunnion alternatives for c/e 12x series
Hello QBFlyer,

The c/e12 are different sizes from other MFDs and won't quite fit their brackets. I expect you could get the (metal) bracket from another display model and adapt it, but personally I think I'd get a simple metal U-bracket made up from the dimensions in the CAD drawings which you can download from https://raymarine.app.box.com/s/8o1sxspk...2382489717 (raymarine.com > Support > Manuals and Documents > MFDs > a/c/e-Series)

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Find all posts by this user
Quote this message in a reply
07-16-19, 03:19 PM (This post was last modified: 07-17-19 07:52 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [TG11] Trunnion alternatives for c/e 12x series
Thanks for the advice. Much appreciated.
Find all posts by this user
Quote this message in a reply
07-17-19, 07:53 AM
Post: #4
RE: [TG11] Trunnion alternatives for c/e 12x series
Noted
Find all posts by this user
Quote this message in a reply
07-17-19, 03:15 PM
Post: #5
RE: [TG11] Trunnion alternatives for c/e 12x series
I cut one of the newer metal brackets for a 125 and sized them to fit. Add the correct pucks and it looks and works beautiful. Instead of the crappy knobs that come with the c125 I used a stainless bolt and washers.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 2 Guest(s)