Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] LH3 Distance and Bearing
07-02-19, 01:44 PM (This post was last modified: 07-05-19 09:04 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] LH3 Distance and Bearing
What is the best way to measure a distance and bearing between two points? (And the current location is neither).

Thanks

W
Find all posts by this user
Quote this message in a reply
07-05-19, 10:45 AM
Post: #2
RE: [LW11] LH3 Distance and Bearing
Dear watsala,

Thank you for your post.

Currently the ruler feature is not available in Lighthouse 3, however it is due to come out with a software update soon.

A suggestion for measuring the distances between 2 points would be to create a route with 2 waypoints. A waypoint and point 1 and a waypoint at point 2, this will give you the distance.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
07-14-19, 03:54 AM
Post: #3
RE: [LW11] LH3 Distance and Bearing
Thanks - this would indeed be a handy feature in the event of say a GPS failure and you need to use the plotter like a paper chart, and also for route planning.

Thanks

W
Find all posts by this user
Quote this message in a reply
07-17-19, 11:14 AM
Post: #4
RE: [LW11] LH3 Distance and Bearing
Dear watsala,

Thank you for your feedback.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)