Thread Closed 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
MFD's Chart application not being populated with LightHouse Charts
01-07-16, 03:52 PM (This post was last modified: 01-07-16 03:57 PM by Chuck - Raymarine - Moderator.)
Post: #1
MFD's Chart application not being populated with LightHouse Charts
Please note that Raymarine's Dragonfly and a/c/e/eS/gS-Series MFDs do not feature internal memory which has been pre-loaded with detailed charts. The base maps installed with a software update are simply a crude maps featuring no navigational detail which have been provided to permit the user to view roughly where detailed cartography is available when the chart boundaries layer has been configured ON. The system is and has always been dependent upon having a Navionics, LightHouse Charts, or C-Map chart card present in the product's microSD memory card reader whenever using the product's Chart application.

Please additionally note that each of Chart application pages/panes are designed to be individually configurable with respect to the type of cartography (Navionics Nautical Charts, Navionics Sonar Charts, LightHouse Charts NOAA Vector - US East Coast, C-Map 4D: Navigational, C-Map 4D Raster Chart, etc.) shown. The default setting for the display's Chart application page/panes is Navionics Nautical Charts. As such, it is possible to configure the each Chart application page/pane to show different types of cartography. In this case, it is recommended that you:
- verify that the microSD card containing the LightHouse Charts has been inserted into the MFD's microSD memory card reader, and
- verify that you have configured each Chart application page/pane (MENU-> PRESENTATION->CHART SELECTION) in which you desire to view LightHouse Charts with menu option corresponding to the LightHouse Charts stored on your microSD memory card.
Visit this user's website Find all posts by this user
Thread Closed 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us