Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] Do I have an ST50 or ST50+ wind display?
07-08-19, 06:59 AM (This post was last modified: 07-09-19 11:15 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] Do I have an ST50 or ST50+ wind display?
Hi,

My boat has an ST50 or ST50+ wind display, but I can't work out which it is.

Looking at the product manuals, the ST50 and 'plus' seem identical - but I understand these have different networking capabilities depending on the model, which I will ask about when i know..

Please see the attached photo. Note the left button is marked 'CAL' as this seems to be marked differently on some displays.

There is also a serial no. on the back which is Z1350230689.

The transducer is the older style with square cups.

Thanks!


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
07-09-19, 11:32 AM
Post: #2
RE: [DG11] Do I have an ST50 or ST50+ wind display?
Hi Carib,

Thank you for your enquiry,

Both the ST50 and ST50+ used the masthead Transducer with the squarish style cups, so that does not imply one version or the other.

The differences were quite subtle, if the CAL button had a stylised LAMP ICON next to it - that would confirm it was ST50+, also if you can press the CAL button down for 12 seconds and get a cal menu to change the data damping on the needle or LCD, that is also an ST50+ display.

regards

Derek
Find all posts by this user
Quote this message in a reply
07-10-19, 09:10 AM
Post: #3
RE: [DG11] Do I have an ST50 or ST50+ wind display?
Thanks Derek, that is helpful and I'll try the calibration test suggested.
Find all posts by this user
Quote this message in a reply
07-11-19, 10:59 AM
Post: #4
RE: [DG11] Do I have an ST50 or ST50+ wind display?
Hi Carib,
you're welcome, best regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us