Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG] [DG11] St4000
07-09-19, 04:11 PM (This post was last modified: 07-25-19 07:54 AM by Derek - Raymarine - Moderator.)
Post: #1
[DG11] St4000
My ST4000 continuously says no data or low batt and goes off course. Is there a logical reason why or is the unit just shot? My mechanic checked it and said that there was no wire corrosion causing the problem.

Thanks.
Find all posts by this user
Quote this message in a reply
07-25-19, 08:42 AM
Post: #2
RE: [DG11] St4000
Hi dcneuro

The symptoms you describe suggest the ST4000 PCB is faulty and will need to be replaced.

This product is no longer supported by Raymarine, since spares are very difficult to come by.

We recommend it is replaced with an Evolution 100 system which can be connected to the same drive as the ST4000 operated.
Regards
Derek
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)