Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ClearCruise AR
07-11-19, 07:24 AM (This post was last modified: 07-17-19 11:53 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ClearCruise AR
I have an AxiomPRO, M232, Quantum Radar, Raynet hub.

I would like to add a CAM220IP and AR200.

I have an (none Raymarine) AIS that feeds an NMEA0183 feed at 38400bps to the AxiomPRO.

Q. Will ClearCruise AR work when the AIS is not on the NMEA2000/SeatalkNG or Raynet?

Q. Will the AR200 also stabilise the M232 picture ?

Thanks
Find all posts by this user
Quote this message in a reply
07-17-19, 11:57 AM (This post was last modified: 07-17-19 12:06 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] ClearCruise AR
Welcome to the Raymarine Forum

Q1. Will ClearCruise AR work when the AIS is not on the NMEA2000/SeatalkNG or Raynet?
A1. First, I am not aware of any compatible AIS transceivers which feature an Ethernet (RayNet) communications interface. Should an AIS receiver be interfaced to the system via NMEA 0183 or via SeaTalkng/NMEA 2000 to the MFD, then ClearCruise AR will be supported with the equipment list specified.

Q2. Will the AR200 also stabilise the M232 picture?
A2. Stabilization of the M132 and M232 thermal cameras in conjunction with the AR200 was introduced within the LightHouse 3 v3.10.39 software update for the Axiom/Axiom Pro/Axiom XL MFDs.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us