Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[JB11] No radar overlay with Q2 Doppler and e97
07-13-19, 09:02 AM (This post was last modified: 07-18-19 09:16 AM by Jacob - Raymarine - Moderator.)
Post: #1
[JB11] No radar overlay with Q2 Doppler and e97
When I had the Quantum dome I had a radar overlay. Now with the Q2 w/Doppler I do not. Couple of questions:
1) How do I determine what level of Lighthouse I have?
2) Will this work with Navionics Platinum +?
3) I do not see how there is a place to turn on Doppler on my display
4) I also do not see how to acquire a target

Your help would be appreciated!
Find all posts by this user
Quote this message in a reply
07-19-19, 03:19 PM (This post was last modified: 07-26-19 08:00 AM by Louise - Raymarine - Moderator.)
Post: #2
RE: [JB11] No radar overlay with Q2 Doppler and e97
Hello Tonyiiiafl,

To answer your questions please refer to my responses below.

Q1) How do I determine what level of Lighthouse I have?
A1) Please click here to view a FAQ addressing this subject.


2) Will this work with Navionics Platinum +?
A2) Yes, if the MFD has been updated with LightHouse II v19.03 software. Please click here to view a FAQ addressing this subject.

Q3) I do not see how there is a place to turn on Doppler on my display
A3. Unfortunately, doppler capabilities are only available on axiom model MultifunctionaDisplays running the light house 3 software.

Q4) I also do not see how to acquire a target
A4) Please click [url= http://forum.raymarine.com/showthread.php?tid=2887]here[/url] to view a thread in which we had previously this subject.
Find all posts by this user
Quote this message in a reply
07-30-19, 02:51 AM (This post was last modified: 07-30-19 07:25 AM by Jacob - Raymarine - Moderator.)
Post: #3
RE: [JB11] No radar overlay with Q2 Doppler and e97
Where do I find the update for Lighthouse 19.3? I was unable to locate?

Thank you!
Find all posts by this user
Quote this message in a reply
07-30-19, 07:42 AM (This post was last modified: 07-31-19 08:22 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: [JB11] No radar overlay with Q2 Doppler and e97
Tonyiiiafl,

Unfortunately there is no light house II 19.3 software, but the lighthouse II 19.03 software can be found at the Raymarine website under the software section. Below is a link to the software page pertaining to e series Multi-Functional Displays.

Please click here
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us