Post Reply 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Microphone connection leads
07-15-19, 03:13 PM (This post was last modified: 07-19-19 08:52 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Microphone connection leads
I am doing an upgrade from RAY240 to RAY260 in the next few weeks. I have just had the software updated on a base unit which is new old stock. I was supplied with two handsets and passive speakers with 10m cables which have the split end to supply the speaker and mic.

One of the handsets is to be very close to the base unit, now I am understanding the connection cables differ from the RAY240, can you tell me the part number for the short handset adaptor cable please?

On page 15 of the latest instructions, section 3.2 it shows an extension cable without the split cables (unlike my own) and a separate short handset adaptor cable, the part I seek.

Oceanis 40 es98 CPT110, AIS 650 dedicated aerial and gps, two i70s, transponder - digital depth speed temperature -ST60 masthead wind via analogue to stng pod, P70s control head, Seatalkng to Seatalk interface to S3g autopilot to type 2 linear drive & Ray240e VHF both aquiring gps via Seatalk interface.
Find all posts by this user
Quote this message in a reply
07-19-19, 08:57 AM (This post was last modified: 07-19-19 08:57 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Microphone connection leads
Welcome to the Raymarine Forum developers,

Ray260 Handset Extension Cables (item 3 in the diagram below) were produced for the Ray260 in the following lengths:
- A80200 5m Ray260 Handset Extension Cable
- A80201 10m Ray260 Handset Extension Cable
- A80202 15m Ray260 Handset Extension Cable

[Image: attachment.php?aid=3324]

Please click here to view a FAQ addressing where one may purchase parts and accessories for Raymarine products.

Attached File(s) Thumbnail(s)
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 

Forum Jump:

User(s) browsing this thread: 1 Guest(s)

Contact Us