Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom cover
07-16-19, 05:48 AM (This post was last modified: 07-19-19 11:50 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom cover
The rubber axiom pro16 cover is leaving marks on my screen of the honeycomb pattern that is on the inside part of cover. Have they changed that design or has anyone found a solution for this?
Find all posts by this user
Quote this message in a reply
07-19-19, 11:54 AM
Post: #2
RE: [CA11] Axiom cover
Welcome to the Raymarine Forum slyluna,

This is the first such report of such received via Raymarine's Forum. It is possible that out-gassing of the suncover's material has created the pattern which you have described. It is recommended that the MFD's screen be cleaned with mineral free water and a microfiber cloth to removed the pattern which you have described. Should doing so not restore the appearance of the MFD's screen, then please respond accordingly.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us