Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
Connecting ES97 to Wirie wifi network
05-23-16, 04:45 PM
Post: #1
Connecting ES97 to Wirie wifi network
I have a WirieAP+ on my boat which allows me to run wifi network. When I try to connect my Es97 to the on board wifi network I get a network conflict error. Spoke to tech support at Wirie and they stated this was a know issue with Ryamarine chart plotter. Anyone hear of this or have any thoughts the wirie forms a 10.x.x.x network.
Find all posts by this user
Quote this message in a reply
05-24-16, 09:34 AM (This post was last modified: 12-30-16 11:41 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: Connecting ES97 to Wirie wifi network
Welcome to the Raymarine Forum dsitver,

Please click here to view a FAQ addressing this subject.
Visit this user's website Find all posts by this user
Quote this message in a reply
09-04-16, 05:01 PM (This post was last modified: 09-12-16 09:53 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: Connecting ES97 to Wirie wifi network
Having same issue with my ES97. Marina provides a wifi access point but I get same conflict error message. When I bring my own wifi access point it connects fine.
Find all posts by this user
Quote this message in a reply
09-09-16, 07:04 AM (This post was last modified: 09-12-16 09:54 AM by Chuck - Raymarine - Moderator.)
Post: #4
RE: Connecting ES97 to Wirie wifi network
Has there been any updates on this feature request?
Find all posts by this user
Quote this message in a reply
09-12-16, 09:58 AM
Post: #5
RE: Connecting ES97 to Wirie wifi network
dsitver,

No changes were introduced within the v17.45 software update to address this feature change. The list of feature additions and changes for each product's software release may be view within or via the corresponding software update web page.
Visit this user's website Find all posts by this user
Quote this message in a reply
06-26-18, 02:02 PM
Post: #6
RE: Connecting ES97 to Wirie wifi network
I am having the same problem at my marina with a brand new Raymarine Axiom Pro 9.
I get the following message when I try to connect to the marina's wi-fi for software updates:

"MARINA-NETWORK-1" has issued an IP address 10.1.13.60 which conflicts with your Raymarine network. Please change the access point settings or contact the network administrator.

The marina is highly unlikely going to do this.
The link in the previous post suggests using a smartphone as a hotspot. This is a real pain and uses up data on my plan.

Does anyone know if this problem has been resolved?

Thanks
Find all posts by this user
Quote this message in a reply
06-26-18, 03:01 PM
Post: #7
RE: Connecting ES97 to Wirie wifi network
Dave,

Please click here to view a FAQ addressing this subject. This feature request has not yet been included within a LightHouse 3 software update.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us