Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Raymarine T-403
07-22-19, 08:11 AM (This post was last modified: 07-25-19 01:24 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine T-403
Hello,

I was wondering if a Raymarine branded T-403 (pn: E32128) that is currently installed in a Raymarine system with E-Wide MFDs will work with a Garmin 8600 series MFD.

There is no JCU and control of the camera is through the E-Wide.

I know Garmin would require the PoE isolator and I've installed Flir-branded cameras to Garmin but I wasn't sure if the Raymarine-branded cameras would work.

Thank you
Find all posts by this user
Quote this message in a reply
07-25-19, 01:51 PM
Post: #2
RE: [CA11] Raymarine T-403
Welcome to the Raymarine Forum Kevin,

Unfortunately, you will likely find that Garmin MFDs are not designed to support Raymarine branded thermal cameras. Although physically the same as the corresponding FLIR thermal cameras, Raymarine manufacturer encoding within the thermal camera's software will likely be rejected by the Garmin MFD.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us