Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] intermittent COG and SOG
07-23-19, 06:08 AM (This post was last modified: 07-29-19 12:22 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] intermittent COG and SOG
On my AXIOM Pro, I see COG and SOG but the reading appears to freeze for about 20 seconds before refreshing. This also affects the COG line from the boat icon. I have changed the filter from Medium to Low to High but that does not solve the problem.
Find all posts by this user
Quote this message in a reply
07-29-19, 12:24 PM (This post was last modified: 07-29-19 12:25 PM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] intermittent COG and SOG
Welcome to the Raymarine Forum godshalk,

Changing the COG/SOG filter's setting from Medium to High will decrease rather than increase the frequency of COG & SOG updates within the system. What version of software is presently installed within the MFD(s)? Of the system's GPS data sources, which one has been selected as the system's source for GPS data? Finally, has the Axiom MFD been installed in a location affording it an unobstructed view of the skies overhead?
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us