The following warnings occurred:
Warning [2] count(): Parameter must be an array or an object that implements Countable - Line: 802 - File: showthread.php PHP 7.4.33 (Linux)
File Line Function
/showthread.php 802 errorHandler->error




Raymarine forum / Raymarine Forums / Radar v / [CA] [CA11] No Data from Magnum

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] No Data from Magnum
07-23-19, 07:50 AM (This post was last modified: 07-29-19 01:18 PM by Chuck - Raymarine - Moderator.)
Post: #1
rwvw415 Offline
Junior Member
**
 		Posts: 3
Joined: Jun 2018
Reputation: 0
[CA11] No Data from Magnum
Like others, I have a completely new Raymarine system including Magnum open array radar, Axiom Pro S and Axiom Pro RVX 12” screens, Raymarine Autopilot and two new transducers for 3D Sonar. Everything worked until I upgraded to the new Lighthouse software. Now I have the same issue that others have where the screens cannot see my radar. We just installed an ON Off switch on the dash panel for the Radar which helped so the radar will come on about half the time. I have no problems with battery power or electricity on the boat. Would you send me the software downgrade and upgrade instructions as I saw that mentioned on this forum but cannot find it now. Please keep it a simple as possible as I’m not completely literate on IT issues.
Find all posts by this user
Quote this message in a reply
Post Reply 


Messages In This Thread
[CA11] No Data from Magnum - rwvw415 - 07-23-19 07:50 AM

Forum Jump:


User(s) browsing this thread: 2 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication