Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[LW] [LW11] Raymarine nmea0183 vs. seatalk
07-29-19, 09:05 AM (This post was last modified: 08-08-19 02:45 AM by Louise - Raymarine - Moderator.)
Post: #1
[LW11] Raymarine nmea0183 vs. seatalk
Good afternoon,

I guess I underestimated the complexity of connecting new and old systems . . .

I got a almost new C125, and would like to connect it with an autopilot, st5000, with a tridata st50, with a wind st50, and eventually with a sl70 radar scanner.

I thought it was enough connecting the NMEA 01183 in and out cable, but did not seem to work.

What should I do? Should I build a backbone Seatalk system? What kind of info could I exchange with the sl70?

Thanks in advance
Find all posts by this user
Quote this message in a reply
08-13-19, 05:01 AM
Post: #2
RE: [LW11] Raymarine nmea0183 vs. seatalk
Dear paolo0611,

Thank you for your post.

You will require a small Stng backbone and the use of the ST1 to STng convertor (this will create a small backbone), more information can be found here. All of your data will then share across the network.

The SL70 can still have the seatalk 1 data fed in to it but you will not be able to network it to the C125 as these products are not compatible.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)