Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] ST6000+ A/P Can't Calibrate Compass
07-29-19, 09:58 PM (This post was last modified: 08-01-19 01:45 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] ST6000+ A/P Can't Calibrate Compass
Tried holding down the appropriate buttons on the st6000 and it will not go into calibration mode. Need to recalibrate the electronic compass. The previous owner incorrectly mounted it near steel. I have relocate the compass and need to calibrate it but cann not get to CAL mode.
Find all posts by this user
Quote this message in a reply
08-01-19, 01:50 PM
Post: #2
RE: [CA11] ST6000+ A/P Can't Calibrate Compass
Welcome to the Raymarine Forum ritsim,

Calibration of a SmartPilot will not be accessible if the autopilot's SeaTrial Calibration Lock feature. Details concerning this feature and how it may be configure on/off may be found on page 47 of the SmartPilot Series Commissioning Guide.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us