Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Raymarine 45STV Gen I
07-30-19, 09:59 AM (This post was last modified: 08-07-19 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Raymarine 45STV Gen I
Morning All,

I have a 2006 Sea Ray 320 Sundancer with all original electronics. I am trying to setup my Sat TV. I have the appropriate receiver, but it seems my firmware has not been updated for some time. I purchased the USB to serial cable, but on the website I only see GEN II firmware. Can I use that firmware to upgrade? Or where can I find the correct firmware?

TIA
Find all posts by this user
Quote this message in a reply
08-07-19, 08:22 AM (This post was last modified: 08-07-19 08:23 AM by Chuck - Raymarine - Moderator.)
Post: #2
RE: [CA11] Raymarine 45STV Gen I
Welcome to the Raymarine Forum TIA,

Please excuse the delay in this response. Raymarine product support would not advise the end user to upgrade the firmware within the receiver. Additionally, no firmware update was produced for the Gen 1 STV45 receiver.
Find all posts by this user
Quote this message in a reply
08-14-19, 10:21 AM (This post was last modified: 08-19-19 04:02 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Raymarine 45STV Gen I
Thanks Chuck,

I spoke with someone in Raymarine and we tried changing the SAT settings but I was told the firmware on the ACU was outdated and needed to be updated.
Find all posts by this user
Quote this message in a reply
08-20-19, 09:51 AM
Post: #4
RE: [CA11] Raymarine 45STV Gen I
smulemd,

Unfortunately, the technician with whom you spoke provided incorrect information regarding the Gen 1 45STV ... no firmware update was produced for the Gen 1 STV45 receiver.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)