Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[TG11] Thermal Camera Home Position
08-02-19, 07:03 PM (This post was last modified: 08-05-19 03:08 PM by Chuck - Raymarine - Moderator.)
Post: #1
[TG11] Thermal Camera Home Position
I can not get a T300 camera to take up a home position looking dead ahead. The unit persists in returning to a home position 45 deg to starboard. I have tried the procedure given in the operations manual without success ie with the camera in the desired home position press and hold the Home button.
Can you assist please?
Find all posts by this user
Quote this message in a reply
08-15-19, 10:31 PM
Post: #2
RE: [TG11] Thermal Camera Home Position
Hello Ken,

Sorry you've not had a reply before. In case you've not already got an answer, e.g. by calling us:

This position 45deg starboard is the place the camera moves to when Home is pressed momentarily?
Does the Home indicator show on the on-screen display when you press Home momentarily, and does it appear and flash when you press-hold?
Does the camera direction indicator bottom-left display the correct orientation?
Do you have a multifunction display (chartplotter) connected to the camera, and if so, what type is it?

Regards,
Tom

Raymarine since 1999.
Interests: Diagnosis of problems in sonar/fishfinders, NMEA2000, ethernet comms, autopilots, thermal cameras
Location: Sydney, Australia.

Please don't PM me asking for direct support, please ask a public question instead so that others can see the question and answer. Forum posts will always be answered before PM requests.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us