Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Stability 3.10?
08-06-19, 05:13 AM (This post was last modified: 08-07-19 02:29 PM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Stability 3.10?
I updated my Axiom -pro to 3.10 and have had a couple of issues.
They may have been present in the previous versions and I didn't encounter them. Only reason to update was for PDF reader.
In a previous update I did a factory reset & power cycle. I didn't do it for this one but I will do that as a first step.
The distances units and depth units DID NOT reset.
I have about 30 tracks from my E127 which i tried to imported and it fails on the last import. I did a quick tally up and altogether I have over 10,000 points.
So is the 10,000 points a total of all the tracks rather than each track?
Find all posts by this user
Quote this message in a reply
08-07-19, 02:27 PM
Post: #2
RE: [CA11] Stability 3.10?
Welcome to the Raymarine Forum Bernie,

Q. So is the 10,000 points a total of all the tracks rather than each track?
A. This is the total per track. 15 saved routes plus an active route can total up to 160,000 track points.
Visit this user's website Find all posts by this user
Quote this message in a reply
08-09-19, 03:50 AM (This post was last modified: Yesterday 12:52 PM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] Stability 3.10?
Thanks for that. I will store excess routes on the SD card.
Find all posts by this user
Quote this message in a reply
Yesterday, 12:53 PM
Post: #4
RE: [CA11] Stability 3.10?
You're welcome.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us