Raymarine forum / Raymarine Forums / Multifunction Displays v / [CA] [CA11] problem converting FSH to GPX

Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] problem converting FSH to GPX
08-08-19, 09:55 AM (This post was last modified: 08-08-19 12:17 PM by Chuck - Raymarine - Moderator.)
Post: #1
mhoullis Offline
Junior Member
**
 		Posts: 4
Joined: Jul 2019
Reputation: 0
[CA11] problem converting FSH to GPX
chuck we spoke a week or so ago. Attached is .fsh file I cnot convert. Thanks
Find all posts by this user
Quote this message in a reply
08-08-19, 12:22 PM
Post: #2
Chuck - Raymarine - Moderator Offline
Administrator
*******
 		Posts: 14,319
Joined: Oct 2014
Reputation: 43
RE: [CA11] problem converting FSH to GPX
mhoullis,

Unfortunately, the Archive.FSH file which you attached includes no data. I tried three different MFDs (E-Series Classic, E-Series Widescreen, and eS-Series (w/LHII R13 software)) and two different software applications (GPS Utility and the FSH to GPX Converter to ensure that nothing had been overlooked. I can only suggest that the MFD be sent to Raymarine’s Product Repair Center to have the data extracted from the MFD's memory via NMEA 0183 to another compatible MFD from which a valid FSH file may then be produced.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us | Raymarine forum | Return to Top | Return to Content | Lite (Archive) Mode | RSS Syndication