Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA] [CA11] Element Custom Page
08-12-19, 09:58 PM (This post was last modified: 08-21-19 11:46 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Element Custom Page
Using Navionics US mapping card. It works on chart app but when chart is in combo with anything, I get a base map. How do I get the Navionics map to transfer to the chart combo apps?
Find all posts by this user
Quote this message in a reply
08-21-19, 01:30 PM
Post: #2
RE: [CA11] Element Custom Page
Welcome to the Raymarine Forum eldora,

Please note that I have been unsuccessful in duplicating this problem with an Element display running LightHouse Sport v3.9.98. Please ensure that your display has been updated with this or a later version of LightHouse Sport software. If so and the problem persists, then it would be recommended that any waypoint/route/track data be backed up and that a Factory Reset (HOME->SETTINGS->THIS DISPLAY->FACTORY RESET) be performed to correct the reported symptom.
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)