Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] Axiom Pro-S with CPT-S - Losing Depth
08-19-19, 04:16 PM (This post was last modified: 08-27-19 10:09 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] Axiom Pro-S with CPT-S - Losing Depth
I have an Axiom Pro-S with a Bronze CPT-S transducer. The MFD loses depth readings in multiple situations. Anytime trolling (~2.5 MPH) at depths over ~180 feet, anytime running over ~15 MPH, occasionally trolling (~2.5 MPH) at depths as low as 20 feet. I also do not mark any fish (indicated by an arc on the Axiom Pro screen as it scrolls)...ever. Help, I'm not sure how to investigate or what might be a root cause.
Find all posts by this user
Quote this message in a reply
08-27-19, 11:03 AM
Post: #2
RE: [CA11] Axiom Pro-S with CPT-S - Losing Depth
Welcome to the Raymarine Forum sberens,

Please attach a photo of the transducer's identification tag (found on the plug end of the transducer's cable) to this thread. Please additionally attach photos of the underside of the hull in the are of the transducer and from behind the transducer, looking forward. Finally, please specify the make/model of boat on which the CPT-S transducer has been installed.
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us