Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[DG11] LightHouse 3.10.42 upgrade install
08-25-19, 02:00 PM (This post was last modified: 08-26-19 11:22 AM by Chuck - Raymarine - Moderator.)
Post: #1
[DG11] LightHouse 3.10.42 upgrade install
LightHouse 3.10.42 upgrade install

Trying to upgrade my 12" Axiom to latest version, in order to fix all the spontaneous reboots that has occurred after installing v.3.9 in spring.

I find it very troublesome to upgrade to latest version to say the least. I have tried from various SD cards, formatted as Fat32 and NTSF. I have downloaded using wifi, but same result. I always end up with this message.

None of the options in the recovery screen solves the issue.

Any ideas how I can move forward?

Best - Jakob
Find all posts by this user
Quote this message in a reply
08-29-19, 04:38 AM
Post: #2
RE: [DG11] LightHouse 3.10.42 upgrade install
Dear jakob_hyldahl,

Thank you for your post.

What size sd cards are you using?

At what point does the screen bring up the recovery mode during the software update?

This is the same problem with installation of software from an sd card and when performing it update via the Axiom online?

Can you perform a power on reset, please be aware you will lose all settings and data, ensure you back this information up before performing the reset. Power down the Axiom from the power source (not just the power swipe button), then power the Axiom back on and swipe the power button from right to left a minimum of 5 times. The standby button will turn blue and the recovery screen will be displayed, select the factory reset followed by a reboot of the machine.

Try to perform the software update after the reset.

Many Thanks
Louise
Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us