Post Reply 
 
Thread Rating:
  • 0 Vote(s) - 0 Average
  • 1
  • 2
  • 3
  • 4
  • 5
[CA11] New MFD for 2013 Sea Ray 310 Sundancer?
08-28-19, 03:27 PM (This post was last modified: 08-29-19 09:29 AM by Chuck - Raymarine - Moderator.)
Post: #1
[CA11] New MFD for 2013 Sea Ray 310 Sundancer?
Looking to upgrade my MFD from Raymarine e7 to Axiom 9 Pro. Love the hybrid features of the e7.

Will it fit left side of the dash (see e7 in photo)? Recommended Raymarine dealer & installer in the Annapolis area?

Thank you.


Attached File(s) Thumbnail(s)
   
Find all posts by this user
Quote this message in a reply
08-29-19, 09:34 AM
Post: #2
RE: [CA11] New MFD for 2013 Sea Ray 310 Sundancer?
Welcome to the Raymarine Forum Miguel,

The below listed Premier Dealer is also a Certified Raymarine Installer

TURNKEY YACHT SERVICES
DBA ANNAPOLIS HARBOR BOAT YARD
326 FIRST STREET
ANNAPOLIS, MD 21403
Phone:410-268-0092

Other Certified Raymarine Installers in the Annapolis area include:

ELECTRONIC MARINE LLC
7344 EDGEWOOD ROAD
BUILDING 7, SUITE 6
ANNAPOLIS, MD 21403
Phone:410-268-8101

J. GORDON & COMPANY, INC
726 2ND STREET
ANNAPOLIS, MD 21403
Phone:410-263-0054
Visit this user's website Find all posts by this user
Quote this message in a reply
09-05-19, 02:35 PM (This post was last modified: 09-09-19 11:30 AM by Chuck - Raymarine - Moderator.)
Post: #3
RE: [CA11] New MFD for 2013 Sea Ray 310 Sundancer?
Thank you Chuck. Do you know if the Axiom 9 Pro will fit on the left side of my 310 Sundancer dash where the current e7 is located?
Find all posts by this user
Quote this message in a reply
09-09-19, 11:35 AM
Post: #4
RE: [CA11] New MFD for 2013 Sea Ray 310 Sundancer?
Miguel,

Unfortunately, the dimensions of electronics mounting surfaces are not commonly available. I can however provide you with the mounting templates for the e7 MFD and the Axiom 9 Pro MFD to permit you to view the footprints of these two MFDs.

- e7/e7D MFD Mounting Template
- Axiom Pro 9 MFD Mounting Template
Visit this user's website Find all posts by this user
Quote this message in a reply
Post Reply 


Forum Jump:


User(s) browsing this thread: 1 Guest(s)

Contact Us